Material Testing Machines

Barcol Hardness Tester


The Barcol Tester is a small portable Hardness Tester having a weight around 1 Kg.

It is suitable for testing hardness of aluminium, aluminium alloys, copper, brass, plastics, fiber glass and other soft materials having hardness from 25 to 150 BHN (10 mm ball / 500 kg load).

Rockwell Hardness Tester


Rockwell Hardness Testers are suitable for checking hardness of metals and their alloys.

Flat, Round as well as irregular types of components can be tested on these machines.

These machines are designed & developed considering the component size to be tested on the machines as well as load & scales to be used by the customer.

These machines are manually operated, simple in design and easy to operate.

Rockwell Hardness Testers are available in various models like VRS, VRS-150, VRB, VRB-250, VSM.

These models strictly confirm to IS:1586:2000, BS:891 part I & II, ASTM-E18 for Rockwell test and IS:2281:1983, BS:240, ASTM-E10 for Brinell test and IS:1586:2000, ASTM for Rockwell Superficial test.

Digital Rockwell Hardness Tester


Digital Motorised Rockwell Hardness Testing Machines are suitable for testing hardness of metals and alloys of all kinds.

These machines are strictly confirm to IS : 1586 : 2000, BS : 891 Part I & II,ASTM E – 18 for Rockwell test and IS : 2281 : 1983, BS : 240, ASTM – E10 for Brinell test and IS : 1586.

Vickers cum Brinell Hardness Testing Machine


Vickers/Vickers cum Brinell hardness testers are suitable for testing very wide range of materials. From very soft material such as lead upto hard material like hardened steel, as well as thin metal strips & case hardened jobs can be tested since the load applied is very small.

Though these machines are easy to operate it is highly precise. A push button system is provided for the selection of loads. Loading cycle and penetration of the indentor in the job starts after pressing the push button. Unloading is accomplished through handle and diagonal/diameter of impression directly appears on the screen.

A built in optical system with graduated readout with Micrometer helps the operator to measure the impression directly from the projection screen. This machine confirms to IS-1754-1986 for vickers and IS-2281-1983, BS-240 for Brinell Test.

Optical Brinell Hardness Tester VB-3000 (O)


This Machine is used for measuring Brinell hardness of ferrous and non ferrous castings in foundries, engineering industries and material testing laboratory.

It is used in forging and heat treatment plants for the measurement of hardness before and after heat treatment.This Machine conforms to IS : 2281 standard and has an accuracy within 1%.

Computerized Brinell / Vickers / Knoop Hardness Measurement system


This Hardness Pro software is exactly what your lab requires to measure your Brinell, Vickers or Knoop Indentations.The software is designed to increase productivity & efficiency to avoid any user error.

The software is also integrated with Microsoft Excel to create powerful spreadsheets at the touch of your finger tips.

This software automatically detects any camera connected to the computer which enables you to use multiple machines with a single software. This unique feature makes it one of its kind.

Auto Turret Digital Micro Vickers Hardness Tester


It has a more faster testing speed than other ordinary Vickers hardness tester. The hardness value can be displayed directly and not need to enter the length of the diagonal. And the HVD-1000AP is famous as its fashion and decent design, high testing precision, stable functions and simple operation.

Universal Testing Machine


Loading Accuracy as high as + 1%. Straining at variable speeds to suit a wide range of materials. Continuous roll autographic recorder supplied as standard to enable study of the behavior of materials.

Motor driven threaded columns for quick effortless adjustment of lower cross-head-to facilitate rapid fixing of test specimen. High reading accuracy due to large size and design of dial. Wide range of standard and special accessories, including load stabilizer.

Easy change from plain to threaded and screwed specimens. Large effective clearance between columns enables testing of standards specimens as well as structures. Simple controls for easy of operation. Robust staining frame of an extremely rigid construction. Safe operation ensured be means of safety device.

Fully enclosed and protected pendulum.

Electronic Extensometer


An extensometer is used to measure changes in the length of an object. It is useful for stress-strain measurements and tensile tests. In the mining environment, extensometers are used to measure displacements on highwalls. Plotting Displacement vs Time enables geotechnical engineers to determine if wall failures are imminent.

Pendulum Impact Testing Machine


The Pendulum is mounted on antifriction bearings. It has two starting positions, the upper one for Charpy & the lower one for izod testing. On release, the pendulum swings down to brake the specimen and the energy absorbed in doing so is measured as the difference between the height of drop before rupture and the height of rise after rupture of the test specimen and is read from the maximum pointer position on the dial scale.

On release, the pendulum swings down to brake the specimen and the energy absorbed in doing so is measured as the difference between the height of drop before rupture and the height of rise after rupture of the test specimen and is read from the maximum pointer position on the dial scale.

Portable Hardness Tester Model TH130


Impact Device D integrated: no cables. Wide measuring range in HLD and direct display of converted hardness values in HB, HRB, HRC,HRA, HV, HS. Simple handling and low test expenditure. Optional printer TA220S available. Impact Device D integrated: no cables

Portable Hardness Tester VH 320


Wide measuring range. It can measure the hardness of all metallic materials. Direct display of hardness scales HRB, HRC, HV, HB, HS, HL and three types of strength values immediately. Large screen LCD, showing all functions and parameters. With EL background light.

Seven impact devices are available for special application. Automatically identify the type of impact devices, and with the user calibration function. Test at any angle, even upsid down,Large memory could store 100 groups (Relative to average times 32~1) informaon including measure value, mean value, impact direction, impact times, material and hardness scale etc.

Battery information showing the rest capacity of the battery and the charge status. Original imported high speed thermal printer support the immediate printing function. It can save data permanently. NI-MH rechargeable battery as the power source. Charge circuit integrated inside the instrument. Continuous working period of not less than 150 hours (EL off and no printing). Auto power off to save energy. Excellent after-sale service system for high quality products-One year warranty. Easy to buy and comfortable to use

Digital Shore Hardness Tester


Shore A:
Measuring range : 0 - 100 Shore A Units
Depth of indentation : 0 - 2.5 mm (the testing material has to be thicker than 6 mm)
Indentor : Flat Cone Point 35º
Measuring force : 0.55 - 8.065 N
Test pressure : 1 Kg
Weight : 200 g (net) ; 300 g (gross)
Dimensions : 115 x 60 x 25 mm


Shore D: Measuring range : 0 - 100 Shore D Units
Depth of indentation : 0 - 2.5 mm (the testing material has to be thicker than 6 mm)
Indentor : Cone Point 30º
Measuring force : 4.45 - 44.5 N
Test pressure : 5 Kg Weight : 200 g (net) ; 300 g (gross)
Dimensions : 115 x 60 x 25 mm


Poldi Hardness Tester


The hammer type Poldi Impact Hardness Tester is useful for simple and quick determination of Brinell hardness of metals such as steel, cast iron, brass, aluminium, copper etc.

Due to its ease of handling and compactness, this tester is most suitable for testing heavy castings and other components.

Coating Thickness Gauge (DFT Meter)

Coating Thickness Gauge

This compact gauge can be used for non-destructive coating thickness measurement of non-magnetic coatings, e.g. paint, enamel, chrome on steel, and insulating coatings, e.g. paint and anodizing coatings on non-ferrous metals.

The internal probe can work on both principles, magnetic induction and the eddy currents. The probe can automatically detect the substrates type (Magnetic or not), and calculate the coating thickness and display it fast.

There are five data groups, and readings will be automatically stored to memory for general groups (Not for direct group). Each group has individual statistics, alarm limit settings and calibration. User can recall and delete specified readings easily.

Packaging Testing Machines

Digital Box Compression Tester


The Box Compression Test measures the compressive strength of packages such as boxes, drums, and cans. It usually provides a plot of deformation vs compressive force. It is commonly used to evaluate shipping containers made of corrugated fiberboard as well as wooden boxes and crates. Industrial and consumer packages other than boxes can also be subjected to compression testing: drum, pail, bottle, tub, etc. Package components are also evaluated for compression resistance. Method of conducting the test as described in several published standard test methods is to compress a box at a constant rate of 1/2 inch (12.5 mm) per minute between two rigid platens. The test can be conducted on empty or filled boxes, with or without a box closure. Conditioning to standard temperature and humidity is important.

The results of the constant rate of compression test can be: • The peak load • The deformation at peak load • The load at a critical deformation (head space, etc.) • The ability of a container to protect the contents from compression damage

Standards: IS : 7028(Part VI) 1973 7028(Part VI) 1975 TAPPI : T804 om-02 ASTM : D 4577-94/D 642-98 PCBM : 14:96 FEFCO : TM 50 1997

Digital Bursting Strength Tester Model BST - D1


Bursting Strength is a reliable index of the strength and performance of materials like paper, paperboards, corrugated boards and boxes etc.

Bursting Strength Tester is ideal for testing a wide range of materials to determine their quality, strength and performance. Bursting Strength Tester is easy to operate.

Bursting Strength Tester Model BST - N2


Bursting strength is a widely used measure of resistance to rupture in various materials. A test specimen isheld between two circular clamps and subjected to an increasing pressure from a rubber diaphragm.

The rubber diaphragm is expanded by a controlled hydraulic pressure until the test specimen ruptures. The bursting strength of The specimen is the pressure reading at the time of rupture.

Bursting Strength Tester Model S1/S2


The Bursting Strength of sample is measured by applying the hydrostatic pressure required for producing rupture of the material, when pressure is applied at a controlled increasing rate through a rubber diaphragm. The value of bursting strength will give an indication of the maximum weight that may be carried in the box. The quality of corrugated boxes is graded based on the value of their bursting strength.

Bursting Strength is a reliable index of the strength and performance of materials like paper, paperboards, corrugated boards and boxes, solid fibreboards, filter cloth, industrial fabrics, leather, Rexene, etc

Cobb Tester


The test is used for determining liquid absorptiveness or resilience of treated and untreated papers, boards, fabrics and other sheet materials.

The test consists of a test apparatus, its 10- kg roller and blotting paper. The roller method is recommended to insure better consistency and reliability that can be obtained by manual blotting or rubbing the specimen.

Core Comperssion Tester


The core compression strength of core pipes is the maximum compressive force that a test piece collapses under constant load.

Pneumatically operated piston to apply the pressure. Maximum pressure to crush the test sample recorded on a gauge with peak pointer. Has adjustable testing area to accommodate specimen sizes and shapes.

Digital GSM Tester


This equipment measures and directly indicates substance of paper and paperboards in terms of grams per sq. meter. It displays gsm of samples cut selected to size on a digital indicator.

Has printer port facility for printing and data transfer.

Digital Moisture Meter (Model-GANN)


Microprocessor based pocket type Moisture meter with LCD display and rugged housing so that the pins on the end of the instrument can be pressed into the material to be measured .
LCD Display Measuring Range : 0 to 90%
Accuracy : + 1%
Electrode Length : 8mm
Replace able Operating Voltage : Battery 9 V
Dimension : L140 X W90 X H50 mm
Weight : 220 gms.
Application: Wooden Boards, Card Board, Paper, Corrugated Box, etc.
Package include - Instrument, 9V Battery, spare pins 2 set, protective cover.

Digital Moisture Meter (Model-VMM)


Microprocessor based pocket type Moisture meter with LCD display and rugged housing so that the pins on the end of the instrument can be pressed into the material to be measured. Mainly used for measuring moisture content of Paper, Paper Board, Wood, Timber .

It is portable, compact, easy to use and the moisture measurement reading are instant .

Digital display with back light gives exact and clearly reading although you stay at the sober conditions .

It will save time and expense by monitoring dryness and helps to prevent deterioration & decay caused by moisture whilst in storage, therefore processing will be more convenient and efficient.

Rub Resistance Tester / Scuff Tester


This equipment is intended to evaluate the Rub Proofness of prints on paper or board. It can also be used to measure / evaluate Colour Transfer from printed / coated surface during rubbing. The application can be extended for measurement of abrasion resistance of some Plastic materials / Aluminum Foils.

Principle :
In this machine, 2 samples of the same substrate are rubbed against each other in the same plane, under a constant pressure of 2 p.s.i and at a fixed speed of 60 RPM. The number of rubs are recorded using a non-contact type digital counter.

Inference :
This machine works as a great comparator of the variations in print quality between various batchesor various suppliers Higher Rub Resistance = better print quality. Lower Rub Resistance = poor print quality.

Puncture Resistance Tester


The specimen is clamped on a fixture and is pierced with the help of a pendulum released from 90 Degree position.The pendulum head is made pointed in a pyramid shape. Different weights are provided in the pendulum for different scales. A pointer is fitted in the pendulum which gives the reading in a calibrated scale.

Puncture Resistance Testing is used for all kinds of paper, paper-board, solid fiber boards & corrugated boards boxes.

Tear Resistance Tester


The equipment is designed to directly read gF (TearForce) per one piece. The Tear Force thus obtained can be converted into Tear Energy, Tear Index or Tear Factor by applying appropriate formula.

Dart Impact Tester


An equipment to test the quality of film / laminate in respect of its resistance to rupture due to sudden Impact.

Pouch Burst Tester


Electro-Pneumatic model with constant rate of travel.

Suitable for testing the Seal Integrity of Liquid / Gas Filled - Pouches / Saches / Blisterpacks.

Suitable for 3 ml – 1,500 ml or larger packs.

Metallurgical Lab Equipments

Inverted Metallurgical Microscope


Inverted Metallurgical Microscope has been engineered to meet the various requirements of modern metallurgical laboratories.

A special feature of the inverted design is a flat unobstructed stage surface which places no limitation on the size and height of the specimen.

Quality assurance throughout manufacturing process ensures that the compliance with demanding performance is matched.

Image Analyser Software


When your Microscope is interfaced with your Computer the next logical step is to add this powerful software . which is a user friendly & easy to learn.It gives reliable & repeated results.

Profile Projector


VW 1000 is an Industrial Profile projector. It is very rugged in construction & designed for use on the shop floor itself The electronic DRO eliminates any manual errors in measuring.

Screen Fine ground glass.Dia. 300 mm. Rotatable 360 degrees. Measuring 1 degree 260 mm etched scale on X & Y axis LC 0.01 MM Stage 125 x 125 mm Mechanical stage. Fitted with DRO On both X & Y axis. X Micrometer 25 mm LC 0.001 mm Y Micrometer 25 mm LC 0.001 mm Easy movement & adjustment Magnification 15x 20x 30X 40X Illumination Transmitted light with One 12V 100W Tungstan Halogen Lamp. The illumination can be increased or decreased Focusing ,By ack & Penion movement of Stage , Instrument size 370 W x 700 H x 630 D mm ,Operating voltage 220V A/C, 50HZ. Net weight 45 Kgs

Single Disk Polishing


Both polish papers or polishing Cloth can be clamped on the rotating disc.
Provision for waterflow & control.
No of Disc - One Disc diameter 20 cms.
Operating on - 220V, Single phase , AC Solid state power supply for motors is inside the machine.
Drive motor - 0.25 HP Speed - Continuously variable upto 1500 RPM Max.
Dimensions-48Lx33Bx28H Cms Net weight-30Kgs

Belt Polisher


For preliminary surface preparation of metallurgical specimens in the laboratory it is an effective machine. Belt tension is adjustable.

Belt can be quickly changed. Adequate safety provided by the belt guard. Belt size 100mmx910mm endless Motor 0.25 HP 1440 RPM 220V A/C Dimensions 460Lx370Bx250H mm

Muffle Furnace


We furnish premium quality Muffle Furnace that are highly demanding. The Muffle Furnace of our showroom are manufactured from the best quality materials that have immense strength and are durable

Hot Air Oven


Carbon Sulpher Apparatus


Vertex semi C & S Determination Apparatus is designed to use to analyse C & S by combustion method.
This apparatus is sturdy and most reliable One.
It is very economical for regular qualitative analysis.
It takes less than 3 minutes to analyse accurately weighed samples.

Cold Setting Resin / Die Set


When the specimen is of odd shape or size tp hold Die Set For mounting the specimens with above cold setting They are kept face down in the die set & cold setting resin in 1:1 powder liquid proportion is poured in cavity.
Mounted specimens become ready in five minutes.
Mould diameter 25,32,38 & 50 mm.
Thickness 15mm it while polishing it becomes essential to mount it.
(One pack Consists Liquid 400 ml + powder 400 gm)

Set Of Graduated Eyepiece


10mm scale divided into 100 parts is mounted inside 5x and 10x eyepieces.
The scale can be focussed by movement of the eyepiece cap.
These are used for measurement of case depth, decarb depth, flex size etc.

Bakelite Hot Mounting Press


For mounting the specimens with Bakelite powder Specimen is kept face down in the Cavity & bakelite Powder is Hot moulded around it with hydraulic pressure.
Mould dia 30 mm.
With Digital timer.
Operates on 220 V A/C

Specimen Leveller


For leveling uneven specimens

Lavigated alumina powder


Grade A (Micron size 0,014 Qty.-500 GMS).
Grade B (Micron size 0,017 Qty.-500 GMS).
Grade C (micron size 0,024 Qty.-500 GM).