|
METALLURGICAL MICROSCOPE TYPE RV3 USB |
| For the first time in India, this is the only Inverted Metallurgical microscope
which has a built in CCD camera & equiped with a USB Port to plug
it directly to your computer for Instant photography & Image analysis.
One more Video out port to connect it to a TV monitor. Microstructure
image with outstanding clarity & resolution is simultaneously seen in
the binoclular head, Computer monitor & or TV. Seprate computer
interfacing attachment ( at item 5) is not required for this microscope.
|
| Stand | Very sturdy & rigid, designed for Industrial use. Built in power supply for the Halogen lamp |
| Mechanical Stage | 140 x 170 mm with graduations. Easy movement & adjustment of specimen. |
| Illumination | Incident light with 12V 50W tungstan halogen lamp
Light house provided with iris diaphragm & slot for
filters, Continuously adjustable illumination. |
| Nose piece | Quadruple revolving, with positive click stop. |
| Coarse focusing | By rack and pinion |
| Fine focusing | Least count 0.002 mm |
| Binocular head | Inclined at 45 degrees.with Interpupillary
and diaptor setting adjustments |
| Objectives | Achromatic 4x, 10x, 20x, 40x, 60x |
| Eyepieces | Huygenian 5x, 10x wide field,15x |
| Magnification | Minimum 20x to Maximum 900x |
|
 |
Magnification Table
| Eyepiece |
Objective |
Magnification |
Eyepiece |
Objective |
Magnification |
Eyepiece |
Objective |
Magnification |
| 5 |
4 |
20 |
10WF |
4 |
40 |
15 |
4 |
60 |
| 5 |
10 |
50 |
10WF |
10 |
100 |
15 |
10 |
150 |
| 5 |
20 |
100 |
10WF |
20 |
200 |
15 |
20 |
300 |
| 5 |
40 |
200 |
10WF |
40 |
400 |
15 |
40 |
600 |
| 5 |
60 |
300 |
10WF |
60 |
600 |
15 |
60 |
900 |
|
| Operating voltage |
220V A/C, 50HZ. |
Net weight |
13 Kgs |
| Instrument Size |
400 L x 340 B x 330 H mm |
Gross weight |
18 Kgs |
|
|
|
METALLURGICAL MICROSCOPE TYPE VMM4 |
| This is a very sturdy Inverted metallurgical Microscope designed for Industrial
use. The Inverted design eliminates the need for specimen mounting. Only
one side of the specimen needs to be polished & no leveling is needed.
Can be interfaced with Computer for Image analysis work.
|
| Stand | Very sturdy & rigid, designed for Industrial use. |
| Mechanical Stage | 140 x 170 mm with graduations. Easy movement & adjustment of specimen. |
| Illumination | Incident light with 12V 50W tungstan halogen lamp
Light house provided with iris diaphragm & slot for
filters, Continuously adjustable illumination. |
| Nose piece | Quadruple revolving, with positive click stop. |
| Coarse focusing | By rack and pinion |
| Fine focusing | Least count 0.002 mm |
| Binocular head | Inclined at 45 degrees.with Interpupillary
and diaptor setting adjustments |
| Objectives | Achromatic 4x, 10x, 20x, 40x, 60x |
| Eyepieces | Huygenian 5x, 10x wide field,15x |
| Magnification | Minimum 20x to Maximum 900x |
|
 |
Magnification Table
| Eyepiece |
Objective |
Magnification |
Eyepiece |
Objective |
Magnification |
Eyepiece |
Objective |
Magnification |
| 5 |
4 |
20 |
10WF |
4 |
40 |
15 |
4 |
60 |
| 5 |
10 |
50 |
10WF |
10 |
100 |
15 |
10 |
150 |
| 5 |
20 |
100 |
10WF |
20 |
200 |
15 |
20 |
300 |
| 5 |
40 |
200 |
10WF |
40 |
400 |
15 |
40 |
600 |
| 5 |
60 |
300 |
10WF |
60 |
600 |
15 |
60 |
900 |
|
| Operating voltage |
220V A/C, 50HZ. |
Net weight |
12 Kgs |
| Instrument Size |
400 L x 200 B x 330 H mm |
Gross weight |
17 Kgs |
|
|
| METALLURGICAL MICROSCOPE TYPE INBT2 |
| This is a very sturdy Inverted metallurgical Microscope designed for Industrial
use. The Inverted design eliminates the need for specimen mounting. Only
one side of the specimen needs to be polished & no leveling is needed.
Can be easily interfaced with Computer for Image analysis work.
|
| Stand | Very sturdy & rigid, designed for Industrial use. |
| Mechanical Stage | 140 x 170 mm with graduations. Easy movement & adjustment of specimen. |
| Illumination | Incident light with 12V 50W tungstan halogen lamp
Light house provided with iris diaphragm & slot for
filters, Continuously adjustable illumination. |
| Nose piece | Triple revolving nose piece |
| Coarse focusing | By rack and pinion |
| Fine focusing | Least count 0.002 mm |
| Binocular head | Inclined at 45 degrees.with Interpupillary
and diaptor setting adjustments |
| Objectives | Achromatic 4x, 10x, 20x, 40x, 60x |
| Eyepieces | Huygenian 5x, 10x wide field,15x |
| Magnification | Minimum 20x to Maximum 1500x |
|
 |
Magnification Table
| Eyepiece |
Objective |
Magnification |
Eyepiece |
Objective |
Magnification |
Eyepiece |
Objective |
Magnification |
| 5 |
4 |
20 |
10WF |
4 |
40 |
15 |
4 |
60 |
| 5 |
10 |
50 |
10WF |
10 |
100 |
15 |
10 |
150 |
| 5 |
20 |
100 |
10WF |
20 |
200 |
15 |
20 |
300 |
| 5 |
40 |
200 |
10WF |
40 |
400 |
15 |
40 |
600 |
| 5 |
60 |
300 |
10WF |
60 |
600 |
15 |
60 |
900 |
|
| Operating voltage |
220V A/C, 50HZ. |
Net weight |
7.5 Kg |
| Instrument Size |
280 L x 160 B x 270 H mm |
Gross weight |
15 Kgs |
|
|
| METALLURGICAL MICROSCOPE TYPE ESM1 T
|
| In addition to Normal Visual Metallurgical applications this microscope
is equipped with a Trinocular head. A CCD Camera can be attached &
Interfaced with your computer for Instant photography & Image analysis
|
| Stand | Very sturdy & rigid, designed for Industrial use. With built in power supply for the Halogen lamp. |
| Mechanical Stage | 120 x 140 mm with graduations. Easy Movement &
adjustment of specimen.
|
| Illumination | Incident light with 6V 20W tungstan halogen lamp
Light house provided with iris diaphragm & slot for
filters, Continuously adjustable illumination. |
| Nose piece | Triple revolving nose piece with positive click stop. |
| Coarse focusing | By rack and pinion |
| Fine focusing | Least count 0.002 mm |
| Trinocular head | Inclined at 45 degrees.Rotatable 360 degrees.Provided
with interpupillary distance & diaptor setting adjustment.
CCD or 35mm camera can be attached to the tube
|
| Objectives | Achromatic 4x, 10x, 20x, 40x, 60x |
| Eyepieces | Huygenian 5x, 10x wide field,15x |
| Magnification | Minimum 20x to Maximum 1500x |
|
 |
Magnification Table
| Eyepiece |
Objective |
Magnification |
Eyepiece |
Objective |
Magnification |
Eyepiece |
Objective |
Magnification |
| 5 |
4 |
20 |
10WF |
4 |
40 |
15 |
4 |
60 |
| 5 |
10 |
50 |
10WF |
10 |
100 |
15 |
10 |
150 |
| 5 |
40 |
200 |
10WF |
40 |
400 |
15 |
40 |
600 |
| 5 |
60 |
300 |
10WF |
60 |
600 |
15 |
60 |
900 |
|
| Operating voltage |
220V A/C, 50HZ. |
Net weight |
7 Kg |
| Instrument Size |
210 L x 190 B x 520 H mm |
Gross weight |
9 Kg |
|
|
| Accessories for the microscope |
| |
| Computer Interface cum CCTV attachment |
(Using your Own Computer,Printer & or TV)
Microscope Type ESM1T, VMM4, VMM6 & INBT2 can be Interfaced to your own computer to give instant
photographs of the Microstructure image. This attachment enables you to take sharp & clear Microstructure
photographs & & their printouts instantly. The Image can be viewed on computer monitor. The image can be
saved on computer hard disk & you can maintain a permanent record of your inspected samples .The saved
photographs can be sent to your vendors or clients by Email.In absence of the computer it can be seen on TV
This attachment is very much necessary If Image analyzer software is to be used
|
 |
Following material to be Provided by you
Computer Pentium III / IV ,Minimum 450Mhz or higher,Hard disk 10 GB, RAM 64 MB CD ROM Drive, Windows 98 SE / 2000
Printer Color ink jet printer 610C / 640 C of HP or equivalent.
TV Samsung 14" Color TV or equivalent model with Video in socket
|
|
Following material to be supplied by us as Computer interface attachment |
| CCD Camera |
AVC 550 (PAL) Japan make or equivalent latest available. |
| Pick up element |
1/3" CCD Image sensor |
BLC function |
|
Auto detect |
| Number of pixel |
512(H)x582(V) PAL |
White balance |
|
Auto |
| Resolution |
380 TV lines |
Video balance |
|
1 Vpp, 75O |
| Min.Illumination |
5 Lux/F2.0 |
Power source |
|
DC 12V |
| S/N Ratio |
More than 45db (AGC off) |
Current consumption |
|
150 ma |
| Electronic shutter |
1/60(1/50) to 1/100000 auto |
|
|
|
|
| Regulated power supply for the CCD Camera , camera to computer cord |
| Camera to Microscope Opto-Mechanical coupler. |
| Frame grabber card ( to be fitted inside your Computer on the PCI slot) with its
Installation manual and Original CD of the Capture program software. |
|
|
| Image Analyser software |
| When your Microscope is interfaced with your Computer the next logical step is to add this powerful
software . which is a user friendly & easy to learn. It gives reliable & repeated results.It performs the
following tasks.
|
1 Evaluation of Microstructure of Graphite As per ASTM A247
A) Measures GraphiteFlake count & Flake size
flake distribution from 1 to 8
Type distribution (A,B,C,D & E)
Size class
B) Measures S.G.IronNodularity & Nodule count
Nodule size distribution from 1 to 8
Type distribution (Well formed/irregular/Detoriated
/Exploded / compacted )
Size class
|
2 Determining Phase volume fractions As per ASTM E562
Determines percentage of Ferrite / Pearlite / Graphite
Steadite/ Carbide / Retained Austenite etc.
Statistically estimates volume fraction of an identifiable phase in the microstructure
|
3 Determining Average grain size As per ASTM E112
by linear intercept (or Heyn's) procedure
|
4 Measurement of Depth of decarburisation As per ASTM E1077
Estimates average or greatest decarburisation depth
of steels ( Also Case depth measurement )
|
5 Determining JK Inclusion Rating As per ASTM E1112
Inclusion rating types A,B,C & D as per JK Chart
based on gray levels & Morphology
|
6 Particle size measurement
Automatic analysis of particles based on size, shape factor
with Particle count & Min./Max. Average
|
7 Standard report Archive
Query based viewing, Report printing, Table & Paper views
|
8 Statistical Process Control - SPC Module
Control charts, Histogram, Control charts for fraction rejected
& Chart for non conformities, Pareto Analysis, Cause effect
diagrams, Multi parameter trends , Comparison charts
|
|
|
Set of graduated eyepiece |
|
10mm scale divided into 100 parts is mounted
inside 5x and 10x eyepieces.The scale can be
focussed by movement of the eyepiece cap.
These are used for measurement of case depth,
decarb depth, flex size etc.
|
 |
|
|
Grain size comparison eyepiece |
|
Compare specimen grain size of the specimen
with standard grain size graticule ( size1 to 8)
mounted inside the 10x widefield eyepiece |
 |
|
|
Grid eyepiece 10x10 |
|
10x10 square grid graticule mounted
in 10x widefield eyepiece.helps in determining
the distribution of nodules in S.G.Iron |
 |
|
|
Test scale |
|
(precision glass scale 1mm divided in 100 parts.
useful for verifying accuracy of the graduated eyepieces) |
 |
|
|
Transmitted light attachment |
|
This can be attached to Microscope INBT2, VMM4
& VMM6 only .Transmitted light can be useful for observing
metal powders, transparent or semitransparent objects. |
 |
|
|
Analyser Polriser attachment |
|
This can be attached to Microscope INBT2, VMM4
& VMM6 only .Polarised light is very useful when observing
Non ferrous specimens |
|
|
Spare lamps 12V 50W Tungstan halogen |
|
( 6 nos/pack.) |
 |
|
|
Lens cleaning tissue book |
|
(for cleaning Microscope optics)
(12 nos/pack |
 |
|
|
Abrasive cut off machine |
This is an ideal,small & compact machine for cutting
specimens for microscopic examination.Its unique
Job clamping vice slides against the cutting wheel by
a counter weight.Coolent pump is in built.
| Cuts sections | upto 70mm |
| Wheel size | 200 mm x 1.5 mm thick |
| Cutting speed | 2000 & 3000 RPM |
| Motor | 1 HP Single phase 220V A/C |
| Dimensions | 650Lx590 B x 400 L mm |
| Net weight | 72 Kgs |
|
 |
|
|
Cold setting Resin |
|
When the specimen is of odd shape or size tp hold it
while polishing it becomes essential to mount it.
(One pack Consists Liquid 400 ml + powder 400 gm)
|
 |
|
Die Set |
|
For mounting the specimens with above cold setting
They are kept face down in the die set & cold setting
resin in 1:1 powder liquid proportion is poured in cavity.
Mounted specimens become ready in five minutes.
Mould diameter 25,32,38 & 50 mm.Thickness 15mm
|
|
|
|
Bakelite mounting press |
|
For mounting the specimens with Bakelite powder
Specimen is kept face down in the Cavity & bakelite
Powder is Hot moulded around itc with hydraulic
pressure. Mould dia 30 mm.
With Digital timer. Operates on 220 V A/C
|
 |
|
Bakelite powder ( 10 kgs/pack) |
|
|
|
|
Stand for holding polish papers |
|
(Strips of four different grades of polish papers can be
clamped on this stand for hand polishing the specimen)
|
 |
|
|
Belt polisher
|
For preliminary surface preparation of metallurgical
specimens in the laboratory it is an effective machine.
Belt tension is adjustable.Belt can be quickly changed.
Adequate safety provided by the belt guard.
Belt size 100mmx910mm endless
Motor 0.25 HP 1440 RPM 220V A/C
Dimensions 460Lx370Bx250H mm
|
 |
|
|
Spare belts for belt polisher
|
|
(size 100 mm Wx 915 mm L Endless)
(12 Nos/Pack)
|
 |
|
|
Single disc polishing machine Mark I
|
Both polish papers or polishing Cloth can be clamped
on the rotating disc. Provision for waterflow & control.
No of Disc - One Disc diameter 20 cms.
Operating on - 220V, Single phase , AC
Solid state power supply for motors is inside the machine.
Drive motor - 0.25 HP
Speed - Continuously variable upto 1500 RPM Max.
Dimensions-48Lx33Bx28H Cms Net weight-30Kgs
|
 |
|
|
Double disc polishing machine Mark II
|
Both polish papers or polishing Cloth can be clamped
on the rotating disc. Provision for waterflow & control.
No of Disc - Two Disc diameter 20 cms.
Operating on - 220V, Single phase , AC
Solid state power supply for motors is inside the machine.
Drive motors- Two 1/3 HP 12V DC
Speed - Continuously variable upto 1400 RPM Max.
Dimensions-105Lx45Bx77H Cms Net weight-55Kgs
|
 |
|
|
Specimen leveler
|
|
(for leveling uneven specimens)
|
 |
|
|
Consumables for polishing |
|
Polish papers grade 0,2/0,3/0,4/0
(25 nos. each Grade,total 100 nos/ pack )
(Minimum order qty. One pack)
|
 |
|
|
Silvet cloth
|
|
Diameter 10"
(for use with the polishing machine)
(12 nos/pack)
|
 |
|
|
Lavigated alumina powder |
|
Grade A
(Micron size 0,014 Qty.-500 GMS.)
|
 |
|
Grade B
(Micron size 0,017 Qty.-500 GMS.)
|
|
|
Grade C
(micron size 0,024 Qty.-500 GMS.)
|
|
|
|
|
|
Chromium oxide powder
(Qty.-500 GMS./pack)
|
 |
|
|
|
|
Diamond paste with lubricant spray
(Paste Type 3-OS-40 Qty. 5 GMS /Tube )
(Lubricant Aerosol fluid spray Qty 200 ml/bottle)
|
 |
|
|
PROFILE PROJECTOR TYPE VW 1000 |
|
VW 1000 is an Industrial Profile projector. It is very rugged in
construction & designed for use on the shop floor itself
The electronic DRO eliminates any manual errors in measuring.
|
| Screen | Fine ground glass.Dia. 300 mm.
Rotatable 360 degrees. Measuring 1 degree
260 mm etched scale on X & Y axis
LC 0.01 MM
|
| Stage | 125 x 125 mm Mechanical stage.
Fitted with DRO On both X & Y axis.
X Micrometer 25 mm LC 0.001 mm
Y Micrometer 25 mm LC 0.001 mm
Easy movement & adjustment
|
| Magnification | 15x
20x
30X
40X
|
| Illumination | Transmitted light with One 12V 100W
Tungstan Halogen Lamp. The illumination
can be increased or decreased
|
| Focusing | By Rack & Penion movement of Stage |
| Instrument size | 370 W x 700 H x 630 D mm |
| Operating voltage | 220V A/C, 50HZ. |
| Net weight | 45 Kgs |
|
 |
|
|
PROFILE PROJECTOR TYPE VW 800 |
|
VW 800 is a very simple Profile projector. It is
designed for use in Industries for measurement of
precession components & is ideal for viewing the
Charpy V Groove impact test specimens.
|
| Magnifications | 10x
20x
40x
|
| Accuracy | + - 1% |
| Screen | Fine ground glass.Dia. 200 mm
Rotatable 360 degrees.
180 mm etched scale on X & Y axis
LC 0.1 mm |
| Stage | 125 x 125 mm Mechanical stage.
X Micrometer 25 mm LC 0.01 mm
Y Micrometer 25 mm LC 0.01 mm
Easy movement & adjustment
|
| Illumination | Transmitted light with One 12V 100W
Tungstan Halogen Lamp. The illumination
can be increased or decreased |
| Focusing | By Rack & Penion movement of Stage |
| Instrument size | 320 W x 600 H x 500 D mm |
| Operating voltage | 220V A/C, 50HZ. |
| Net weight | 30 Kgs |
|
 |
| |
